Dolby Trailers 224

Dolby Logo

This Dolby Trailers page lists all the Dolby trailers we have at thedigitaltheater.com.

To playback the MKV files in Dolby TrueHD you will need a media player such as Media Player Classic Home Cinema (MPC-HC) or a Media Server such as Plex that can output the Lossless stream via HDMI to an AV Receiver that supports Dolby TrueHD. These files have been tested with both MPC-HC and Plex.

To enjoy the MKV files in Dolby ATMOS, in addition to the requirements above, your AV Receiver must support Dolby ATMOS and you must have additional ceiling mounted speakers or Dolby Atmos enabled speakers. Without those you will still experience the audio in Lossless TrueHD.

Trailer NameDownload LinkVideoAudioUpdate Date
AmazeDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Amaze (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Bit Harvest (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
Catalyst (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
ChameleonDownloadM2TS H265 2160p Dolby Vision
M2TS H265 1080p Dolby Vision		Dolby TrueHD 7.1 ATMOS
Dolby Digital Plus ATMOS		2019-08-20
City Redux (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
Conductor (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Core UniverseDownloadM2TS H265 2160p Dolby Vision
M2TS H265 1080p Dolby Vision		Dolby TrueHD 7.1 ATMOS
Dolby Digital Plus ATMOS		2019-08-20
Countdown v1DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Countdown v1 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 5.1
Countdown v2DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Countdown v2 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 5.1
Dolby 3D Glasses Return Trailer Flat (2D)DownloadMKV H.264 1080pDTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby 3D Glasses Return Trailer Flat (3D)DownloadISODTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby 3D Movie Return Trailer Flat (2D)DownloadMKV H.264 1080pDTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby 3D Movie Return Trailer Flat (3D)DownloadISODTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby Cinema - ElementDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Dolby Cinema - ElementDownloadMKV H.264 1080pDolby AC3 5.1 640 kbps
Dolby Cinema - Universe (Nature's Fury)DownloadMKV H.264 2160p SDR 92.5 MbpsDolby TrueHD 7.1 ATMOS, Dolby Digital Plus 7.1, Dolby Digital 5.12020-07-22
EscapeDownloadM2TS H265 2160p Dolby Vision
M2TS H265 1080p Dolby Vision		Dolby TrueHD 7.1 ATMOS
Dolby Digital Plus ATMOS		2019-08-20
LeafDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Leaf (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
LeviathanDownloadM2TS H265 2160p Dolby Vision
M2TS H265 1080p Dolby Vision		Dolby TrueHD 7.1 ATMOS
Dolby Digital Plus ATMOS		2019-08-20
Nature's Fury (Dolby Digital Plus ATMOS)DownloadMKV H.264 1080pDolby Digital Plus 5.1 ATMOS
Nature's Fury (Lossless - ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
PufferfishDownloadM2TS H265 2160p Dolby Vision
M2TS H265 1080p Dolby Vision		Dolby TrueHD 7.1 ATMOS
Dolby Digital Plus ATMOS		2019-08-20
Silent (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Spheres v1DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Spheres v1 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
Spheres v2DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Spheres v2 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
UnfoldDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Unfold 2 (Lossless - ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Unfold (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS

Leave a comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

224 thoughts on “Dolby Trailers”

  • Reply ↓
    Mark

    Hey there,

    Thanks for the uploads. I was wondering how I can get the video trailers included on the September 2015 Dolby Atmos demo disk.

    There was one with Game of Thrones and Insurgent, Mad Max etc.

    It’s the latest one and I cannot find it anywhere.

  • Reply ↓
    Jeremy

    Challenge question for you: I have some .mkv Dolby Atmos BluRay backups and I’d like to play them on my TV. My TV is a new LG 4K TV with a webOS that has Plex. I also have the new Apple TV that has the Plex app installed. The receiver is a Denon Atmos enabled receiver and I’m using the ARC channel on the TV & Receiver. How should I “stream” the video file in order to enjoy the Atmos audio. Should I use the Plex app on the TV, the Plex app on the new Apple TV, or play the file via a USB stick directly into my TV (i.e. still TV output via ARC but with no Plex app needed)… Or will none of these give me the result I need? I’ve trolled the internet for days and can’t find any definitive answer. Lastly, I do see that the Amazon FireTV (new Nov. 2015 one) supports Atmos (EC3_JOC) so should I buy that box instead so that Atmos would work OR am I still limited by the Plex app capabilities… Lots to ponder, but the outcome that I want is simple — to enjoy Atmos sound that’s contained in the .mkv file I have…

    • Reply ↓
      Bill Davey

      Hey I just had a similar challenge: to play an mkv video file with Dolby Atmos audio. (prefer not to buy another Media “box”) – I discovered my Panasonic Blu ray (BDT330) plays them off a USB stick to my Yamaha Receiver Perfectly with full Dolby Atmos

    • Reply ↓
      maheswaran.A

      no some of the tv product ensures that ARC tehnology sounds for 2.1 ch whether av receiver receives it only upconverted into (pro or stereo) 5.1 only. if you want dolby atmos effect you need an bluray player which support upto 7.1ch through hdmi port and bluray disc which contains DTS HDMA (5.1 or 7.1) & DOLBY TRUHD (5.1 or 7.1) dolby tru-hd supports dolby atmos better than dts-hdma

    • Reply ↓
      Eric

      Most TV’s with ARC doesn’t support 5.1 format, let alone Dolby ATMOS. Apple TV does not support ATMOS passthrough either. I suggest you invest in a media player/server which supports Dolby ATMOS passthrough as well as DTS X support. Nvidia Shield and Dune Solo supports those formats.

    • Reply ↓
      Karen

      2016 LG TV does not support Atmos over hdmi arc… The only way is connect your AVR input to the any Atmos supported player and send this video signal from AVR HDMI port to the LG TV

    • Reply ↓
      Wells

      Hello and thank you for the demos. Any chance that you can get the 4K copy of the AMC Dolby Cinema intro? Or perhaps the Dolby Presents: “Universe” demo?

    • Reply ↓
      maheswaran.A

      if you have sound card then it has a hdmi port OUT through this (5.1ch or 7.1ch) audio transfer occurs.so you need an 7.1 av receiver that support dolby atmos in av receiver hdmi port IN available. connect hdmi (IN and OUT) through hdmi cable.if you watch bluray disc movies you need an bluray drive like (lg or pioneer or lite-on) in your computer.

    • Reply ↓
      Jonathan Post author

      Hi anand. To get Dolby Atmos you will need a receiver that has an Atmos Decoder, and you will need to have an HDMI connection to the receiver. A player on the PC that supports Dolby TrueHD should be able to send the Atmos encode to the receiver.

  • Reply ↓
    Jorge m

    SOrry, But I Dont speak English god, but i nedd help.

    I have to Onkyo Tx-Nr838 with dolby atmos, and PS4, my problem is that. i cant play MKV Atmos, in my Ps4, worn sound and mi Onkyo recevier cant play.

    What do i do

    pelase I need Help

    tanks

    • Reply ↓
      Jonathan Post author

      Hi David. Yes, An A/V Receiver with 5.1.2 ATMOS would playback the 7.1 ATMOS properly. What Receiver do you have? I just ordered the Onkyo TX-NR747.

      • Reply ↓
        David

        Thanks Jonathan! I have the ONKYO TX-NR646 and I just installed the two ceiling speakers. Now I need a

        movie with a good ATMOS, any idea?

        • Reply ↓
          Jonathan Post author

          Transformers: Age of Extinction is often mentioned as having a great ATMOS track, along with Terminator Genisys, Mission Impossible: Rogue Nation, San Andreas, and Mad Max: Fury Road. Be sure to let us know which you liked the best.

      • Reply ↓
        Addi

        Dear Jonathan and everyone,
        I have an Onkyo NR3030 with an HP Envy M7-N109 laptop hooked up to via HDMI. I have tried multiple players on the laptop such as VLC’, and MPC-HC, regular media player from Windows 10 and so far I have not been able to have my receiver display the “Dolby Atmos” signal. The most my receiver will display is either “Multichannel”, DTS, or Dolby Digital.

        I have 7.1.4 set up, therefore my speaker and setup work perfectly on a Bluray with Atmos. The problem is just going through the laptop for some reason. Appreciate anyone that can help me.

        • Reply ↓
          Jonathan Post author

          Open control panel, and then go to sound. Make sure that you have your receiver selected, and that the correct speaker configuration is selected. Let me know if that helps.

          • Addi

            I figured it out. After opening MPC-HC, I needed to change the audio settings to send the bitstream, lossless data to my receiver. After that I got the Atmos light to work. Thank you Jonathan.

  • Reply ↓
    alex

    Hi,
    I am new to surround sound in general and Dolby Atmos in particular so please excuse what may be a dumb question.
    I grabbed all the Atmos samples from here and then got information about them via mediainfo. This told me that they were all 7.1 files with two fronts and a centre channel, two side (surround) channels , two rear channels and an LFE channel.
    There was no mention of any ceiling / height channels.
    My receiver , the Marantz 7010 is a 9.2 receiver with the possibility of going to 11.2 by using an external stereo amp.
    When I eventually move into my dedicated cinema room I intend to set up a system incorporating two fronts and a centre, two sides, two rears and two ceiling speakers along with a couple of subwoofers.
    My question is will these files give me the true Atmos experience despite mediainfo not reporting any ceiling channels as being present ?

    • Reply ↓
      Jonathan Post author

      Yes, they will. Dolby ATMOS uses the Dolby TrueHD 7.1 format as the foundation. The ATMOS objects are contained in the meta data of the TrueHD stream, and will be decoded with your ATMOS receiver. When I play them using my Onkyo TX-NR747, the input on the display reads “Dolby Atmos”

      • Reply ↓
        alex

        Hi Jonathan,
        Thanks for the clear explanation.
        I look forward to playing these demos when I am up and running with my 7.2.2 system.

  • Reply ↓
    Glen

    Hi there, I have just bought an Onkyo TX RZ800 running 7.2.2 speakers (rear ceilings) and would love to demo it with these files and tweak the levels (AccuEQ is fine but I like to tinker!) I can’t seem to download them?. It says to “save link as” but I only have “save target as” and that appears to be the html page. Am I a dinosaur and doing it wrong? Would love to spend the day THX reffing these files. Is it my laptop or are the files no longer downloadable by right click? Also, will they work with 7.2.2 i.e two subs? Many thanks!

    • Reply ↓
      Jonathan Post author

      Hi Glen,

      Sorry about that – all you need to do is to click on the download link. I removed the instruction that says to right-click as it no longer applies.

      • Reply ↓
        Glen

        Hi Jonathan- excellent – thanks!. I managed to download them shortly afterward. What a great afternoon of surround it was. Amaze Atmos is stunning – a real lesson in articulating the sound around the speakers. But I have a question on Atmos if I may? I have an Onkyo RZTX800 (only had it a week or two so still tweaking it!) It’s a THX 7.2.2, wired up accordingly with the heights placed at rear and the amp has been configured to know that array etc. But I played Everest BD and the rear surrounds are silent. The Heights worked and the film sounded phenomenal, (ridiculous sub-sonics across the last 50 mins!) but nothing from the rear surrounds?. The Amaze Atmos demo went around all 9.2 speakers in truly wonderful surround, but the movie didn’t touch the rear surrounds. Is this an Onkyo set up issue? or a BD encoding issue i.e that’s what the studio wants= 5.2.2 not 7.2.2 I’m still learning about the ‘listening modes’ and the amp defaults to ‘Dolby Atmos’ once the film starts as I have the input default as ‘direct’ for BD. Is there an Onkyo setting that will kick the rears in as well as the heights? or am I way off track and it’s encoded in the BD not to do that. I’m a little confused as to what I should be getting from an Atmos setting as I thought setting the amp up as 7.1.2 would send sound to all the speakers as well as the heights? Sorry for the long explanation. Cheers Glen.

        • Reply ↓
          Jonathan Post author

          Hi Glen,

          It sounds like you have everything set up correctly. Have you confirmed that there actually no audio in the rear channels when playing Everest? I would actually go and put your ear close to a rear speaker to confirm that there is nothing but silence. The Everest track is 7.1 atmos, so there should be something there. I find my rear speakers to be very difficult to isolate when watching a movie, and really the Dolby Amaze trailer is the best example I have heard of an actual sound in the rear channels where I could honestly sense the sound moving behind me. For the most part I find the rears help to give the surround soundstage better balance and coverage. Anyway, play Everest again and go up to your rear channels and confirm if they are indeed silent.

          • Glen

            Hi Jonathan
            I’ve reset my RZ800 and my BD player and then double checked the rears again with Everest and they are still silent. The heights are kicking in nicely but no sound from the rears.
            I think I know what the issue might be: My Onkyo is 7.2.2 (with separate speaker posts for rear surrounds and separate speaker posts for heights) but it’s actually only a 5.2.2 Atmos system.
            So perhaps a 7.1 Atmos encoded BD simply resorts to 5.1 Atmos on my RZ800 and shuts off the rear surrounds??
            I think it’s a way of being able to flick between 7.1 BD content and Atmos content without reconfiguring your amp or mucking about with cables etc. So it would explain why there is no Atmos content coming from the rears as my amp simply doesn’t push sound to them. Strange thing is that you and another person ( including a BD review site,) all say that Everest is in Dolby Atmos and Dolby TrueHD 7.1 (48kHz, 24-bit), but my disc does not have any choice within the Audio menu – it just says Dolby Atmos…..with no DTHD7.1 choice? Perhaps if I could select that DTHD7.1 option and not the Dolby Atmos option, it would ping sound around in 7.1 and my rear speakers would start singing (but the two heights would remain silent as they only kick in when detecting an Atmos signal) any idea on how I access the DTHD7.1 choice? .
            Or perhaps it’s my idiotic brain not accepting that 7.1 = 1fl, 2cc, 3fr, 4sl, 5sr, 6lh, 7rh, .1sub = 7.1! and that Atmos isn’t supposed to work your rears, it’s supposed to work your heights!
            Haha, I’m tying myself in knots here.

  • Reply ↓
    Darren Faux

    I have a denon avr-x1200w and have downloaded some of the .mkv files. Along with MPC-HC they sound great but I dont know whether I am playing them in atmos or just in true HD. I have the correct setup with the atmos speakers but I cannot get Atmos to display on the Denon. Only Virtual or surround etc? Any ideas how I can find out if it is playing in Atmos or just True-HD?

    Thank again 🙂

  • Reply ↓
    gerson gomes

    Ola colegas,
    sou novo no assunto, acabei de montar o meu HT, e como não conheço muito sobre os videos de demonstrativos da Dolby, aonde consigo videos mais longos? o meu equipamento decodifica Atmos, DTS-X etc.. por onde poderia começar? se alguem tiver em seus arquivos videos de IMAX entre outros, ficaria muito grato em receber..

  • Reply ↓
    Jp.suresh

    Hi…
    Really I Love dolby atmos sound system… because dolby was real surround sound… and clear sounds… and perfect powerfull Bass… i feel amazing…
    I Love and I Like sooooo much Dolby

  • Reply ↓
    Sanchez

    thanks for making these available. I’ve downloaded, added the media player you suggest and output to my ATMOS enabled Denon 2200 from my PC with an HDMI but ATMOS isn’t picked up or selectable on my amp..

    Any suggestions?

  • Reply ↓
    robert Romero

    I hear ZERO surround activity when playing the lossless ATMOS files. I’ve tried this on my main system and my bedroom system. I know for a fact that they are both Dolby True HD capable, I hear plenty of surround activity when playing TrueHD sources. What’s wrong?

  • Reply ↓
    Raij

    Can I use MPC-HC program to play bitstream full Dolby Atmos on my receiver RX-V 681 and the receiver to indicate it with “Dobly Atmos” logo. If yes, can you specify full settings? Do I have to change my laptop soundcard settings?

  • Reply ↓
    DC Koppen

    Hello Jonathan !

    Wow the Dolby Cinema Element trailer !
    It’s so awesome 🙂 I have been looking for it as well.
    Glad to see that a multichannel version exists.
    I think that the db levels are a bit low compared to the rest or is it my imagination ?
    Also is it too much too wish for a lossless Dolby Atmos/true HD version ? or doesn’t that exist period?

  • Reply ↓
    dennis

    Hi Jonathan !
    How awesome to have the Dolby Element trailer now!
    Normally it would be in True HD/Atmos, any chance getting that version ?

  • Reply ↓
    Shrey Tyagi

    MKV is not a good format for ATMOS. M2TS is better and more compatible with ATMOS. A lot of players encounter the problem of not being able to extract the objects properly from the 7.1 bed when the audio is in MKV container (Although it still does give full 7.1 channel surround but the object information in a lot of bluray players is lost). Search the topic in hometheatre forums for detailed info.

    So only if the audio is ATMOS, then please pack in M2TS. Otherwise MKV is the best format.

  • Reply ↓
    Nick

    Im looking for the new Dolby Cinema demo thats featured in some cinemas right now. I saw it when I went to the new Transformers movie but I can find it anywhere. I remember that there was a part that I only saw a white circle and the black around it was totally black. Hopefully someone can help me find this.

    • Reply ↓
      Johann Viebrock

      I asked the creators of the pre-show, Midnight Sherpa,
      they say that the Pre-show must kept in Dolby Cinemas because of Dolby contracts

  • Reply ↓
    Adam

    Hi,

    I just came here to say thanks for these files. I downloaded the atmos versions and ran them via Nvidia Shield to my 7.1.2 set-up and it sounded glorious.

    Strangely enough this sounds better in terms of sound height and positioning than any 4K BluRay I’ve tried with Atmos so far.

    I’m wondering why that might be.

  • Reply ↓
    Eric

    Greetings.
    I recently bought an Nvidia Shield TV 2017 (which supports both ATMOS and DTS X) to compliment my Onkyo TX-NR646. I then downloaded most of the ATMOS and “lossless” samples from here and they sound EXCELLENT. I love the “Amaze”, “Leaf”, and “Dolby Cinema-Element” the most…truly immersive. I have a 5.2.2 setup NOT a 5.1.2 🙂 . The “.2” in the middle is actually a split signal between my subwoofer and a tactile transducer (Crowson Tech) for a better subsonic experience. I don’t have to crank my subwoofer now to “feel” the lows since the transducers are doing that.

    I do have a question though. I have a few movies which have a 5.1 or 7.1 TrueHD signal support but the “ATMOS” indicator doesn’t light up on my Onkyo. May I ask why?

    • Reply ↓
      Eric

      Never mind. I found the answer. Thanks again for sharing these files. Hope you can share the ones on the Dolby ATMOS demo disc though…

  • Reply ↓
    Bulbul

    Hi Jonathan, thanks for all these dolby files. I have bought an Onkyo TX-R710 receiver (yes it supports dolby atmos) and I have setup my speakers to 5.1.2 settings. I have a Sony x930d 4K TV. I have downloaded some of the files and put them on a flash drive and played the files via the TV’s USB port.
    But unfortunately I am not getting my receiver to detect the audios in Dolby.
    Although the receiver do pick it when playing all my other movies which ranges from Dolby Atmos to DTS X. And strangely enough the DTSX files which I downloaded from your website, seems to be working perfectly.
    I am in now way an audio expert nor in this receiver so I wouldnt have a clue whats going on. Would really love to hear your opinion in this. Thanks.

      • Reply ↓
        Parker

        Great archive, Jonathan. Thanks for providing it.
        I’ve got the same issues, but a different setup:
        Denon AVRS730H. TV and AVR are connected using ARC. Tried it through the Samsung One Connect box, PS4 Media Player, across the server, everything. I’ve tried to switch from Bitstream (Dolby), to Bitsream DTS, and PCM. Nothing is decoding properly. “Audio not supported.”

  • Reply ↓
    Kevin

    Could you get your hands on the Dolby Atmos “Nature’s Fury trailer?
    I have seen it on Youtube, but of course it’s stereo only and nothing beats a native Atmos mix.

    Would be awesome if you could. It’s a great sound demo with lots of panning effects from all directions

    Thank you.

  • Reply ↓
    Kevin

    Do you think you could get your hands on the “Nature’s fury Dolby Atmos trailer?

    I have seen it on Youtube from Dolby Asia, but it’s in stereo only and nothing beats a native Atmos mix.
    It’s a great demo with lots of panning effects from all directions.
    It also happens to be one of the demo’s they use in their own Dolby cinema’s right before a movie is played

    Thanks a bunch.

    • Reply ↓
      Johann Viebrock

      Hi Kevin,
      when you search ,,Dolby Developer GitHub” on Google, click on ,,DolbyDev” , when you are there click on ,,DolbyDev/Universal_Windows_App”, then go on ,, view code”, after that click on ,,Dolby.UAP” .
      When you have done this, go to ,,Assets” , then on ,,Content”, after that click on ,,Videos” , and finally click on the ,, natures-fury-3mbps.mp4” and download it, it is the Trailer you are looking for.
      To download it correctly, you must be in the Desktop Version.

      • Reply ↓
        Martin

        Hello,

        I am actually looking for the combined Atmos and Vision version of Nature’s Fury that is being showed in cinemas right now. Do you guys know if this version is available anywhere online. I’d preffer it to be in Atmos but if it’s not that’s no problem with me.

        Thanks in advance

      • Reply ↓
        Kevin

        Hi, I tried your method but the video only contains stereo audio, verified through my receiver (Its also only 43 megabytes, no way it could contain Atmos)

        However I found the actual place where Dolby keeps the trailer in true Atmos albeit not lossless. My receiver says its Dolby Digital+ embedded with Atmos (same format Netflix is using to deliver Atmos)

        (Windows 10 required):
        Open the Microsoft Edge browser (Currently the only one with Dolby Audio support.
        Next go here: http://developer.dolby.com/support.aspx
        Select HLS on Universe Fury demo (Some idiot named it incorrectly), The demo will now stream in Dolby Atmos if your equipment is setup correctly.
        I dont know how to download it directly, but I wish there was a way for our convenience.

        This took me a long time to find, but its great. Lots of activity in the overhead channels (no upmixing). I have 7.1.4 setup.
        Enjoy.

  • Reply ↓
    Hugo Olivares Jacuinde

    Hola. Me gustaría proyectar en una de mis salas los trailers de Dolby, dónde puedo descargarlos en formato DCP ??

    Hi. I would like to show Dolby’s trailers in one of my rooms, where I can download them in DCP format

  • Reply ↓
    Jonathan Blanco

    Can you please upload the IMAX-Countdown to Blade Runner 2049 in 7.1 Dolby TrueHD?? use whatever container you have to get that audio output.

    thanks

    • Reply ↓
      Jonathan Post author

      I think that VUE cinemas intro is fantastic, but unfortunately I do not have anything other than what is available on vimeo. I could upmix it…it might sound decent.

      • Reply ↓
        Jonathan Post author

        I need more info to help you. What ones are you having trouble with? What are you playing it back on? What AV Receiver do you have?, etc.

      • Reply ↓
        Jonathan Post author

        I need more info to help you. What ones are you having trouble with? What are you playing it back on? What AV Receiver do you have?, etc..

        • Reply ↓
          Randy

          hi downloaded amaze lossless and leaf lossless on android box which i have hooked up to marantz 7009 a/v receiver when i play it plays video but comes up no audio file I have 7.2.4 dolby atmos

          • Randy

            Using VLC player The downloads that are not in dolby atmos I can get sound Some of the downloads that are dolby atmos I can get sound but it plays in Dolby surround not dolby atmos

          • Jonathan Post author

            VLC does not support more than stereo audio, at least not by default. There may be a way to do it, but I do not know how. Media Player Classic Home Cinema can play virtually any format, including Atmos and DTS:X. You can get it at https://mpc-hc.org

        • Reply ↓
          Miguel Angel Ruiz

          Hola Jonathan Perdon por la pregunta y no tiene nada que ver con Dolby Atmos.Me puedes dar tu opinion del Suwoofer Cerwin Vega LW-12? Gracias

      • Reply ↓
        William Davey

        Hi, I had issues with my Android Box (Minix) playing to my Yamaha Atmos Receiver. It needs to bitstream the Dolby True HD sound which carries the Atmos encoding. Not all media players can do this, and if so their Audio settings need to be right as well.
        Regards
        Bill

          • Droid_hunter

            First of all, your PC needs to be connected to the Marantz via HDMI

            Secondly The connection MUST be HDMI 2.0 (HDMI 1.4 only supports up to 7.1 channels)

            And thirdly you can Use VLC 3.0 (latest) which has a new Audio passthrough feature which will send Dolby Atmos and DTS X unprocessed to the receiver for decoding.

  • Reply ↓
    Julian Weir

    Hello. Do you have any of these trailers with an audio codec of AAC? I have a Panasonic Blu Ray player (model DMP-UB900) and it (surprisingly) only supports MP4 audio with AAC codec. Picture works fine, just no sound is sent to my receiver (Yamaha RX-V2067). Thanks.

  • Reply ↓
    Emmanuel Isaac

    I must advise against using MKV for Dolby TrueHD/Atmos as they strip off the AC3 core that is required for Blu-ray players.

    M2TS is much more suitable for TrueHD as the AC3 core is crucial and works much better.

    • Reply ↓
      Кинияев Фома

      oh, and…

      it’s said that the preshow (never compromise) for the 12.1 IMAX is a little different from the ordinary one, could you please upload that version???

  • Reply ↓
    W Wamn

    Thank you! All the Atmos demos work great on my Yamaha rxv583 expect the Nature’s Fury (Dolby Digital Plus ATMOS) one which the receiver just won’t recognise as Atmos! No idea why.

  • Reply ↓
    Indi318

    Hi Nice collection,. Is there any way I could download Dolby’s Atmos and Dolby ision short film “Escape”? Thank you.

  • Reply ↓
    Mark Orsted

    any way to have an blu-ray ISO built with all of these items and make it downloadable? Would be great to just pop in a disc.

  • Reply ↓
    Sam93

    Hi there, sorry I’m new to this site but I’ve been following it recently and since I’m having a few issues with my new Dolby Atmos soundbar I was just wondering if you good people could help me?
    Here are some details to help:
    Blu-Ray Player: Panasonic DMP-UB400 4K Blu-Ray Player
    TV: Sony Bravia 49” XD7005 model TV.
    Soundbar: Sony HT-XF9000

    I have been trying to play some of these trailers on my blu-ray player via USB but the player tells me audio file not supported. The picture plays fine but there is no sound.

    I have also been playing some Atmos enabled blu-ray discs and even though the sound plays fine here, I do not think it sounds Atmos enhanced like the demos I’ve heard in the stores for this soundbar.

    I have my soundbar connected to my blu-ray player via 2 high-speed HDMI cables (one for AUDIO OUT to the IN slot of the soundbar, and the other going into the HDMI2 slot of my TV). I then have a HDMI from the TV ARC slot of the soundbar to the ARC input on the TV. Since there is this 4K audio link between the soundbar bar & blu-ray Player I have set it to AUDIO BITSTREAM OUT on the player settings and disabled secondary audio.

    To complicate things the player remote is not showing any display to tell me if it is an Atmos broadcast when I click the button – something which I have emailed them about today.

    Sorry for the essay but if you have any advice at all for what I might be doing wrong it would be much appreciated!

  • Reply ↓
    Lee Wilmore

    Can any one help me
    I have a Panasonic DMP-UB900 blu Ray player linked too my pioneer SC-LX89 with supports Dolby atoms
    Have downloaded the demos too usb
    And plugged into blu Ray player
    It plays video but no sound says Audi format not supported ??

  • Reply ↓
    Justin

    I’m running these Atmos demo files from Plex & and an Apple TV 4K to a Marantz SR 7012. I run Atmos with no issues from the Apple TV using Netflix and Vudu & from my Blu-ray player. When running the demo files, it will show as Atmos as my input sound type but I’m only getting sound from my front 3 channels and the sub. Set up is 5.1.2. Any ideas?

    • Reply ↓
      Corza

      If you check out the “escape” Dolby Vision/Atmos video it’s even worse. It’s out of sync on the sample disc itself. On the Vision/Atmos app on the LG OLED is perfect though. I wish I could find a version to have that isn’t out of alignment. I tried to fix myself, but the channels are actually mastered and layered and mixed out of sync, so I couldn’t do anything about it 🙁

  • Reply ↓
    Richard Rojas

    Is there anyway you can please upload the ‘dolby intro’ trailer.
    It’s basically the longer version of ‘nature fury’ that was on the Dolby access app not to long ago. For some strange reason they took it down with some of the worst trailers with the latest update (12/20/18). I’ve been searching high and low even went as far as contacting Dolby and seeing if they could help. Here’s a link on YouTube where I found it.

    https://youtu.be/QhCVuqAO18Y

  • Reply ↓
    Petri Lahti

    hi! can you find that dolby see hear spectacular or dolby calls it dolby universe demo in youtube… they removed it from the dolby app 🙁

  • Reply ↓
    Muneer Munavary

    Hi,
    There are 2 Dolby Atmos trailers (Leaf & Amaze) available in https://www.dolby.com/us/en/guide/dolby-atmos-trailers.html, which is in MP4 format. Can you upload other Atmos trailers in MP4 format? I am not able to play the Atmos trailers which you have uploaded here in MKV format via USB in my Sony Bluray player, however MP4 format in Dolby website is working fine and I am able to feel the Atmos effect in my HT-ST5000 soundbar.

    • Reply ↓
      Zee

      im having the same problem getting Atmos to work with your files but the MP4 files from dolby work fine and my Denon reciver displays Atmos when playing them

      i use the latest Apple TV and plex to play

    • Reply ↓
      Jim

      Same here. I downloaded several of your Atmos files and none of them output in Atmos for me when played on Plex. The Atmos trailers from Dolby’s site work fine so I know my setup works.

  • Reply ↓
    Tim

    You are a superhero for putting these new Dolby trailers up for us. The Core Universe trailer gave my wife and I so much emotion on our Atmos setup I got literal goosebumps. Thank you! Thank you! Thank you!

  • Reply ↓
    T R Black

    Hi Jonathan,

    Thank YOU for this wonderful site. Your effort is very much appreciated. I will make a contribution soon. First, I would like to offer some feedback and make an inquiry.

    I became a believer in Atmos when I first heard it in 2003 at the Dolby Labs in Burbank with a friend who was a member of the MPSE. It took me until December 2017 until I could afford to own a system. The receiver said Atmos, the disk player said Atmos, but…you know all the frustrations one can experience in trying to piece together all the components necessary to have actual true Atmos experience. Even the Dolby site has contradictions and mis-implications. What an ordeal. But, I was determined.

    After MUCH research (and a couple of years with my not quite Atmos system), I delineated what I define as a “mid-sized” full Atmos system with Dolby Vision. Finally, within the past two months, I have put together ALL the requirements for a 7.2.4 audio system with an adequate monitor/TV (not quite OLED, yet). I have much to share later, in a white paper, which I will email to you.

    In that I do some consulting, I wanted to set up a folder of samples to demo this system so that people could decide what options they want and what compromises they are willing to make. Outside of full-length DVDs and movies/shows from Netflix and Prime, all I could find were the two files from Dolby, which you correctly show and provide as DD+ (compressed Atmos). I can’t believe that Dolby Labs doesn’t want to share samples at True HD (uncomressed Atmos) to help the likes of us evangelize the wonders of a full Atmos system optimally set-up.

    I was resigned to having only the two compressed files and having to demo parts of films/shows, which is time-consuming and interruptive. That is until I stumbled upon your wonderful site. I downloaded every file I deemed good for a full demo, including: your IMAX samples, THX samples, DTS samples, and Dolby Atmos samples that are True HD with Dolby Vision. I placed them in a folder on a high quality USB 3.1 flash drive.

    My reports regarding results as follows: On my LG SM9070PUA (Dolby Vision/Dolby Atmos 7.1 True HD capable with an HDMI 2.1 eARC port) The IMAX and THX samples are awesome! The DTS files only played in Stereo at low volume compared to other files (and 15db less than the DTS Master logo on a Blu-ray). The files encoded with M2TS all showed at Dolby Vision on the screen and Dolby Atmos on my Denon X3600H receiver. Looked and sounded awesome. However, the MKV files showed as Dolby Vision with an error message, “This video does not support audio.”

    Bummed, but not deterred, I plugged the flash into the USB port on my Sony x800 disc player (HDR, but no Dolby Vision…Panasonic 820 on the way). Results: Perfect IMAX, THX, DTS, and Dolby in M2TS format. Same “no audio in this video” message with the MKV files. However, interestingly, the stream show-up as Atmos True HD on my Denon even though there was no sound.

    Therefore, at long last, my inquiry: Why the use of MKV format when the M2TS format carries the 7.1 True HD info/sound superbly? I have read that MKV, while widely accepted and open-source, doesn’t always work. My Sony specs say MKV is supported under Video, but no sign of it under Audio (although there is a supported spec for MKA…which I would assume being the audio half of MKV…but no cigar). Do you have any suggestions for my situation? I feel SO close to demo bliss…

    Any help would be greatly appreciated. Merci!

  • Reply ↓
    Luiz

    Hey! Love the site. Unfortunately I can’t get the Vision trailers to work on a Plex client of a Shield direct playing them to a compatible AVR and TV. The TV reports regular HDR10. I think that’s because they’re dual layer files. Single layer Vision files play fine using the same scenario.

  • Reply ↓
    Robin

    Hey guys,

    I have download some Dolby Atmos 5.1 trailers. Put the files on to a USB stick, put the USB stick into the Samsung 7000 series TV (2020), which is linked to a Sonos ARC though HDMI E-arc. So on the TV I see the video, but I don’t hear any sound.. it just keeps on saying ‘your lisiting to the dolby digital compangon track not the dolby atmos…’.

    Am I doing something wrong? Can you guys help me out?

    I would really appreciate it.

    • Reply ↓
      Afifi

      As far as I know, Samsung smart TVs only have Dolby Digital Plus encoder, no TrueHD. So you will not get lossless Dolby Atmos content. That’s why no sound because you play Dolby Atmos trailers lossless/uncompressed (TrueHD). If you play the trailers lossy/compressed (Dolby Digital Plus) you will get the sound.

      If you want to play TrueHD trailers, use PLEX media player (Nvidia Shield TV Pro) which has TrueHD encoder to process Dolby Atmos lossless contents.

  • Reply ↓
    Michael Lerner

    Ein freundliches Hallo mit der Bitte um Hilfe wenn möglich.
    Die Trailer laufen vom USB Stick TOP.
    Geräte sind
    Sony AF9 OLED
    Synology DS918+
    Plex installiert, leider kein Atmos Ton, entweder gar kein Ton oder nur Stereo.
    Ein Tip wäre Klasse.

  • Reply ↓
    Jerry V

    Hi all, awesome site! Does anyone have any feedback on how to get the Dolby Sphere demos to play? I cannot get any of my players to play them with sound…