Dolby Trailers 121


Dolby Logo

This Dolby Trailers page lists all the Dolby trailers we have at thedigitaltheater.com.

To playback the MKV files in Dolby TrueHD you will need a media player such as Media Player Classic Home Cinema (MPC-HC) or a Media Server such as Plex that can output the Lossless stream via HDMI to an AV Receiver that supports Dolby TrueHD. These files have been tested with both MPC-HC and Plex.

To enjoy the MKV files in Dolby ATMOS, in addition to the requirements above, your AV Receiver must support Dolby ATMOS and you must have additional ceiling mounted speakers or Dolby Atmos enabled speakers. Without those you will still experience the audio in Lossless TrueHD.

Interested in our customizable pre-show trailer? Check it out here:
Custom Home Theater Pre Show Trailer with 7.1 Audio

Trailer NameDownload LinkVideoAudio
AmazeDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Amaze (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Bit Harvest (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
Catalyst (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
City Redux (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
Conductor (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Countdown v1DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Countdown v1 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 5.1
Countdown v2DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Countdown v2 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 5.1
Dolby 3D Glasses Return Trailer Flat (2D)DownloadMKV H.264 1080pDTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby 3D Glasses Return Trailer Flat (3D)DownloadISODTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby 3D Movie Return Trailer Flat (2D)DownloadMKV H.264 1080pDTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby 3D Movie Return Trailer Flat (3D)DownloadISODTS-HD MA 5.1
PCM 5.1
AC3 5.1
Dolby Cinema - ElementDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Dolby Cinema - ElementDownloadMKV H.264 1080pDolby AC3 5.1 640 kbps
LeafDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Leaf (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Silent (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Spheres v1DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Spheres v1 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
Spheres v2DownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Spheres v2 (Lossless)DownloadMKV H.264 1080pDolby TrueHD 7.1
UnfoldDownloadMP4 H.264 1080pDolby AC3 5.1 640 kbps
Unfold 2 (Lossless - ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS
Unfold (Lossless-ATMOS)DownloadMKV H.264 1080pDolby TrueHD 7.1 ATMOS


Leave a comment

Your email address will not be published. Required fields are marked *

121 thoughts on “Dolby Trailers

  • Mark

    Hey there,

    Thanks for the uploads. I was wondering how I can get the video trailers included on the September 2015 Dolby Atmos demo disk.

    There was one with Game of Thrones and Insurgent, Mad Max etc.

    It’s the latest one and I cannot find it anywhere.

  • Jeremy

    Challenge question for you: I have some .mkv Dolby Atmos BluRay backups and I’d like to play them on my TV. My TV is a new LG 4K TV with a webOS that has Plex. I also have the new Apple TV that has the Plex app installed. The receiver is a Denon Atmos enabled receiver and I’m using the ARC channel on the TV & Receiver. How should I “stream” the video file in order to enjoy the Atmos audio. Should I use the Plex app on the TV, the Plex app on the new Apple TV, or play the file via a USB stick directly into my TV (i.e. still TV output via ARC but with no Plex app needed)… Or will none of these give me the result I need? I’ve trolled the internet for days and can’t find any definitive answer. Lastly, I do see that the Amazon FireTV (new Nov. 2015 one) supports Atmos (EC3_JOC) so should I buy that box instead so that Atmos would work OR am I still limited by the Plex app capabilities… Lots to ponder, but the outcome that I want is simple — to enjoy Atmos sound that’s contained in the .mkv file I have…

    • Bill Davey

      Hey I just had a similar challenge: to play an mkv video file with Dolby Atmos audio. (prefer not to buy another Media “box”) – I discovered my Panasonic Blu ray (BDT330) plays them off a USB stick to my Yamaha Receiver Perfectly with full Dolby Atmos

    • maheswaran.A

      no some of the tv product ensures that ARC tehnology sounds for 2.1 ch whether av receiver receives it only upconverted into (pro or stereo) 5.1 only. if you want dolby atmos effect you need an bluray player which support upto 7.1ch through hdmi port and bluray disc which contains DTS HDMA (5.1 or 7.1) & DOLBY TRUHD (5.1 or 7.1) dolby tru-hd supports dolby atmos better than dts-hdma

    • Eric

      Most TV’s with ARC doesn’t support 5.1 format, let alone Dolby ATMOS. Apple TV does not support ATMOS passthrough either. I suggest you invest in a media player/server which supports Dolby ATMOS passthrough as well as DTS X support. Nvidia Shield and Dune Solo supports those formats.

    • Karen

      2016 LG TV does not support Atmos over hdmi arc… The only way is connect your AVR input to the any Atmos supported player and send this video signal from AVR HDMI port to the LG TV

    • maheswaran.A

      if you have sound card then it has a hdmi port OUT through this (5.1ch or 7.1ch) audio transfer occurs.so you need an 7.1 av receiver that support dolby atmos in av receiver hdmi port IN available. connect hdmi (IN and OUT) through hdmi cable.if you watch bluray disc movies you need an bluray drive like (lg or pioneer or lite-on) in your computer.

    • Jonathan Post author

      Hi anand. To get Dolby Atmos you will need a receiver that has an Atmos Decoder, and you will need to have an HDMI connection to the receiver. A player on the PC that supports Dolby TrueHD should be able to send the Atmos encode to the receiver.

  • Jorge m

    SOrry, But I Dont speak English god, but i nedd help.

    I have to Onkyo Tx-Nr838 with dolby atmos, and PS4, my problem is that. i cant play MKV Atmos, in my Ps4, worn sound and mi Onkyo recevier cant play.

    What do i do

    pelase I need Help

    tanks

    • Jonathan Post author

      Hi David. Yes, An A/V Receiver with 5.1.2 ATMOS would playback the 7.1 ATMOS properly. What Receiver do you have? I just ordered the Onkyo TX-NR747.

      • David

        Thanks Jonathan! I have the ONKYO TX-NR646 and I just installed the two ceiling speakers. Now I need a

        movie with a good ATMOS, any idea?

        • Jonathan Post author

          Transformers: Age of Extinction is often mentioned as having a great ATMOS track, along with Terminator Genisys, Mission Impossible: Rogue Nation, San Andreas, and Mad Max: Fury Road. Be sure to let us know which you liked the best.

      • Addi

        Dear Jonathan and everyone,
        I have an Onkyo NR3030 with an HP Envy M7-N109 laptop hooked up to via HDMI. I have tried multiple players on the laptop such as VLC’, and MPC-HC, regular media player from Windows 10 and so far I have not been able to have my receiver display the “Dolby Atmos” signal. The most my receiver will display is either “Multichannel”, DTS, or Dolby Digital.

        I have 7.1.4 set up, therefore my speaker and setup work perfectly on a Bluray with Atmos. The problem is just going through the laptop for some reason. Appreciate anyone that can help me.

        • Jonathan Post author

          Open control panel, and then go to sound. Make sure that you have your receiver selected, and that the correct speaker configuration is selected. Let me know if that helps.

          • Addi

            I figured it out. After opening MPC-HC, I needed to change the audio settings to send the bitstream, lossless data to my receiver. After that I got the Atmos light to work. Thank you Jonathan.

  • alex

    Hi,
    I am new to surround sound in general and Dolby Atmos in particular so please excuse what may be a dumb question.
    I grabbed all the Atmos samples from here and then got information about them via mediainfo. This told me that they were all 7.1 files with two fronts and a centre channel, two side (surround) channels , two rear channels and an LFE channel.
    There was no mention of any ceiling / height channels.
    My receiver , the Marantz 7010 is a 9.2 receiver with the possibility of going to 11.2 by using an external stereo amp.
    When I eventually move into my dedicated cinema room I intend to set up a system incorporating two fronts and a centre, two sides, two rears and two ceiling speakers along with a couple of subwoofers.
    My question is will these files give me the true Atmos experience despite mediainfo not reporting any ceiling channels as being present ?

    • Jonathan Post author

      Yes, they will. Dolby ATMOS uses the Dolby TrueHD 7.1 format as the foundation. The ATMOS objects are contained in the meta data of the TrueHD stream, and will be decoded with your ATMOS receiver. When I play them using my Onkyo TX-NR747, the input on the display reads “Dolby Atmos”

      • alex

        Hi Jonathan,
        Thanks for the clear explanation.
        I look forward to playing these demos when I am up and running with my 7.2.2 system.

  • Glen

    Hi there, I have just bought an Onkyo TX RZ800 running 7.2.2 speakers (rear ceilings) and would love to demo it with these files and tweak the levels (AccuEQ is fine but I like to tinker!) I can’t seem to download them?. It says to “save link as” but I only have “save target as” and that appears to be the html page. Am I a dinosaur and doing it wrong? Would love to spend the day THX reffing these files. Is it my laptop or are the files no longer downloadable by right click? Also, will they work with 7.2.2 i.e two subs? Many thanks!

    • Jonathan Post author

      Hi Glen,

      Sorry about that – all you need to do is to click on the download link. I removed the instruction that says to right-click as it no longer applies.

      • Glen

        Hi Jonathan- excellent – thanks!. I managed to download them shortly afterward. What a great afternoon of surround it was. Amaze Atmos is stunning – a real lesson in articulating the sound around the speakers. But I have a question on Atmos if I may? I have an Onkyo RZTX800 (only had it a week or two so still tweaking it!) It’s a THX 7.2.2, wired up accordingly with the heights placed at rear and the amp has been configured to know that array etc. But I played Everest BD and the rear surrounds are silent. The Heights worked and the film sounded phenomenal, (ridiculous sub-sonics across the last 50 mins!) but nothing from the rear surrounds?. The Amaze Atmos demo went around all 9.2 speakers in truly wonderful surround, but the movie didn’t touch the rear surrounds. Is this an Onkyo set up issue? or a BD encoding issue i.e that’s what the studio wants= 5.2.2 not 7.2.2 I’m still learning about the ‘listening modes’ and the amp defaults to ‘Dolby Atmos’ once the film starts as I have the input default as ‘direct’ for BD. Is there an Onkyo setting that will kick the rears in as well as the heights? or am I way off track and it’s encoded in the BD not to do that. I’m a little confused as to what I should be getting from an Atmos setting as I thought setting the amp up as 7.1.2 would send sound to all the speakers as well as the heights? Sorry for the long explanation. Cheers Glen.

        • Jonathan Post author

          Hi Glen,

          It sounds like you have everything set up correctly. Have you confirmed that there actually no audio in the rear channels when playing Everest? I would actually go and put your ear close to a rear speaker to confirm that there is nothing but silence. The Everest track is 7.1 atmos, so there should be something there. I find my rear speakers to be very difficult to isolate when watching a movie, and really the Dolby Amaze trailer is the best example I have heard of an actual sound in the rear channels where I could honestly sense the sound moving behind me. For the most part I find the rears help to give the surround soundstage better balance and coverage. Anyway, play Everest again and go up to your rear channels and confirm if they are indeed silent.

          • Glen

            Hi Jonathan
            I’ve reset my RZ800 and my BD player and then double checked the rears again with Everest and they are still silent. The heights are kicking in nicely but no sound from the rears.
            I think I know what the issue might be: My Onkyo is 7.2.2 (with separate speaker posts for rear surrounds and separate speaker posts for heights) but it’s actually only a 5.2.2 Atmos system.
            So perhaps a 7.1 Atmos encoded BD simply resorts to 5.1 Atmos on my RZ800 and shuts off the rear surrounds??
            I think it’s a way of being able to flick between 7.1 BD content and Atmos content without reconfiguring your amp or mucking about with cables etc. So it would explain why there is no Atmos content coming from the rears as my amp simply doesn’t push sound to them. Strange thing is that you and another person ( including a BD review site,) all say that Everest is in Dolby Atmos and Dolby TrueHD 7.1 (48kHz, 24-bit), but my disc does not have any choice within the Audio menu – it just says Dolby Atmos…..with no DTHD7.1 choice? Perhaps if I could select that DTHD7.1 option and not the Dolby Atmos option, it would ping sound around in 7.1 and my rear speakers would start singing (but the two heights would remain silent as they only kick in when detecting an Atmos signal) any idea on how I access the DTHD7.1 choice? .
            Or perhaps it’s my idiotic brain not accepting that 7.1 = 1fl, 2cc, 3fr, 4sl, 5sr, 6lh, 7rh, .1sub = 7.1! and that Atmos isn’t supposed to work your rears, it’s supposed to work your heights!
            Haha, I’m tying myself in knots here.

  • Darren Faux

    I have a denon avr-x1200w and have downloaded some of the .mkv files. Along with MPC-HC they sound great but I dont know whether I am playing them in atmos or just in true HD. I have the correct setup with the atmos speakers but I cannot get Atmos to display on the Denon. Only Virtual or surround etc? Any ideas how I can find out if it is playing in Atmos or just True-HD?

    Thank again 🙂

  • gerson gomes

    Ola colegas,
    sou novo no assunto, acabei de montar o meu HT, e como não conheço muito sobre os videos de demonstrativos da Dolby, aonde consigo videos mais longos? o meu equipamento decodifica Atmos, DTS-X etc.. por onde poderia começar? se alguem tiver em seus arquivos videos de IMAX entre outros, ficaria muito grato em receber..

  • Dude

    Hello Jonathan. Not sure if you can help, but I’m looking for a 7.1 version of the Coke Thirst Dolby bumper. I can always get it from YouTube in stereo, but I would prefer to find one in TrueHD. No luck searching on the web.

  • Jp.suresh

    Hi…
    Really I Love dolby atmos sound system… because dolby was real surround sound… and clear sounds… and perfect powerfull Bass… i feel amazing…
    I Love and I Like sooooo much Dolby

  • Sanchez

    thanks for making these available. I’ve downloaded, added the media player you suggest and output to my ATMOS enabled Denon 2200 from my PC with an HDMI but ATMOS isn’t picked up or selectable on my amp..

    Any suggestions?

  • robert Romero

    I hear ZERO surround activity when playing the lossless ATMOS files. I’ve tried this on my main system and my bedroom system. I know for a fact that they are both Dolby True HD capable, I hear plenty of surround activity when playing TrueHD sources. What’s wrong?

  • Raij

    Can I use MPC-HC program to play bitstream full Dolby Atmos on my receiver RX-V 681 and the receiver to indicate it with “Dobly Atmos” logo. If yes, can you specify full settings? Do I have to change my laptop soundcard settings?

  • DC Koppen

    Hello Jonathan !

    Wow the Dolby Cinema Element trailer !
    It’s so awesome 🙂 I have been looking for it as well.
    Glad to see that a multichannel version exists.
    I think that the db levels are a bit low compared to the rest or is it my imagination ?
    Also is it too much too wish for a lossless Dolby Atmos/true HD version ? or doesn’t that exist period?

  • dennis

    Hi Jonathan !
    How awesome to have the Dolby Element trailer now!
    Normally it would be in True HD/Atmos, any chance getting that version ?

  • Shrey Tyagi

    MKV is not a good format for ATMOS. M2TS is better and more compatible with ATMOS. A lot of players encounter the problem of not being able to extract the objects properly from the 7.1 bed when the audio is in MKV container (Although it still does give full 7.1 channel surround but the object information in a lot of bluray players is lost). Search the topic in hometheatre forums for detailed info.

    So only if the audio is ATMOS, then please pack in M2TS. Otherwise MKV is the best format.

  • Nick

    Im looking for the new Dolby Cinema demo thats featured in some cinemas right now. I saw it when I went to the new Transformers movie but I can find it anywhere. I remember that there was a part that I only saw a white circle and the black around it was totally black. Hopefully someone can help me find this.

    • Johann Viebrock

      I asked the creators of the pre-show, Midnight Sherpa,
      they say that the Pre-show must kept in Dolby Cinemas because of Dolby contracts

  • Adam

    Hi,

    I just came here to say thanks for these files. I downloaded the atmos versions and ran them via Nvidia Shield to my 7.1.2 set-up and it sounded glorious.

    Strangely enough this sounds better in terms of sound height and positioning than any 4K BluRay I’ve tried with Atmos so far.

    I’m wondering why that might be.

  • Eric

    Greetings.
    I recently bought an Nvidia Shield TV 2017 (which supports both ATMOS and DTS X) to compliment my Onkyo TX-NR646. I then downloaded most of the ATMOS and “lossless” samples from here and they sound EXCELLENT. I love the “Amaze”, “Leaf”, and “Dolby Cinema-Element” the most…truly immersive. I have a 5.2.2 setup NOT a 5.1.2 🙂 . The “.2” in the middle is actually a split signal between my subwoofer and a tactile transducer (Crowson Tech) for a better subsonic experience. I don’t have to crank my subwoofer now to “feel” the lows since the transducers are doing that.

    I do have a question though. I have a few movies which have a 5.1 or 7.1 TrueHD signal support but the “ATMOS” indicator doesn’t light up on my Onkyo. May I ask why?

    • Eric

      Never mind. I found the answer. Thanks again for sharing these files. Hope you can share the ones on the Dolby ATMOS demo disc though…

  • Bulbul

    Hi Jonathan, thanks for all these dolby files. I have bought an Onkyo TX-R710 receiver (yes it supports dolby atmos) and I have setup my speakers to 5.1.2 settings. I have a Sony x930d 4K TV. I have downloaded some of the files and put them on a flash drive and played the files via the TV’s USB port.
    But unfortunately I am not getting my receiver to detect the audios in Dolby.
    Although the receiver do pick it when playing all my other movies which ranges from Dolby Atmos to DTS X. And strangely enough the DTSX files which I downloaded from your website, seems to be working perfectly.
    I am in now way an audio expert nor in this receiver so I wouldnt have a clue whats going on. Would really love to hear your opinion in this. Thanks.

      • Parker

        Great archive, Jonathan. Thanks for providing it.
        I’ve got the same issues, but a different setup:
        Denon AVRS730H. TV and AVR are connected using ARC. Tried it through the Samsung One Connect box, PS4 Media Player, across the server, everything. I’ve tried to switch from Bitstream (Dolby), to Bitsream DTS, and PCM. Nothing is decoding properly. “Audio not supported.”

  • Kevin

    Could you get your hands on the Dolby Atmos “Nature’s Fury trailer?
    I have seen it on Youtube, but of course it’s stereo only and nothing beats a native Atmos mix.

    Would be awesome if you could. It’s a great sound demo with lots of panning effects from all directions

    Thank you.

  • Kevin

    Do you think you could get your hands on the “Nature’s fury Dolby Atmos trailer?

    I have seen it on Youtube from Dolby Asia, but it’s in stereo only and nothing beats a native Atmos mix.
    It’s a great demo with lots of panning effects from all directions.
    It also happens to be one of the demo’s they use in their own Dolby cinema’s right before a movie is played

    Thanks a bunch.

    • Johann Viebrock

      Hi Kevin,
      when you search ,,Dolby Developer GitHub” on Google, click on ,,DolbyDev” , when you are there click on ,,DolbyDev/Universal_Windows_App”, then go on ,, view code”, after that click on ,,Dolby.UAP” .
      When you have done this, go to ,,Assets” , then on ,,Content”, after that click on ,,Videos” , and finally click on the ,, natures-fury-3mbps.mp4” and download it, it is the Trailer you are looking for.
      To download it correctly, you must be in the Desktop Version.

      • Martin

        Hello,

        I am actually looking for the combined Atmos and Vision version of Nature’s Fury that is being showed in cinemas right now. Do you guys know if this version is available anywhere online. I’d preffer it to be in Atmos but if it’s not that’s no problem with me.

        Thanks in advance

      • Kevin

        Hi, I tried your method but the video only contains stereo audio, verified through my receiver (Its also only 43 megabytes, no way it could contain Atmos)

        However I found the actual place where Dolby keeps the trailer in true Atmos albeit not lossless. My receiver says its Dolby Digital+ embedded with Atmos (same format Netflix is using to deliver Atmos)

        (Windows 10 required):
        Open the Microsoft Edge browser (Currently the only one with Dolby Audio support.
        Next go here: http://developer.dolby.com/support.aspx
        Select HLS on Universe Fury demo (Some idiot named it incorrectly), The demo will now stream in Dolby Atmos if your equipment is setup correctly.
        I dont know how to download it directly, but I wish there was a way for our convenience.

        This took me a long time to find, but its great. Lots of activity in the overhead channels (no upmixing). I have 7.1.4 setup.
        Enjoy.

  • Hugo Olivares Jacuinde

    Hola. Me gustaría proyectar en una de mis salas los trailers de Dolby, dónde puedo descargarlos en formato DCP ??

    Hi. I would like to show Dolby’s trailers in one of my rooms, where I can download them in DCP format

  • Jonathan Blanco

    Can you please upload the IMAX-Countdown to Blade Runner 2049 in 7.1 Dolby TrueHD?? use whatever container you have to get that audio output.

    thanks

    • Jonathan Post author

      I think that VUE cinemas intro is fantastic, but unfortunately I do not have anything other than what is available on vimeo. I could upmix it…it might sound decent.

      • Jonathan Post author

        I need more info to help you. What ones are you having trouble with? What are you playing it back on? What AV Receiver do you have?, etc.

      • Jonathan Post author

        I need more info to help you. What ones are you having trouble with? What are you playing it back on? What AV Receiver do you have?, etc..

        • Randy

          hi downloaded amaze lossless and leaf lossless on android box which i have hooked up to marantz 7009 a/v receiver when i play it plays video but comes up no audio file I have 7.2.4 dolby atmos

          • Randy

            Using VLC player The downloads that are not in dolby atmos I can get sound Some of the downloads that are dolby atmos I can get sound but it plays in Dolby surround not dolby atmos

          • Jonathan Post author

            VLC does not support more than stereo audio, at least not by default. There may be a way to do it, but I do not know how. Media Player Classic Home Cinema can play virtually any format, including Atmos and DTS:X. You can get it at https://mpc-hc.org

      • William Davey

        Hi, I had issues with my Android Box (Minix) playing to my Yamaha Atmos Receiver. It needs to bitstream the Dolby True HD sound which carries the Atmos encoding. Not all media players can do this, and if so their Audio settings need to be right as well.
        Regards
        Bill